FUNCTION
This light is equipped with 3 motion sensors: zone 1 covers 60 degree, zone 2 covers 100 degrees and zone 3 covers 60 degrees.
220 degrees (maximum) in total for 3 zones.
The light will switch on for 3 minutes and off automatically when heat/ movement is detected.
The factory default: the light on fixed at 3 minutes and works all day.
To change the mode to nighttime only, push the button at the bottom of the housing and the hidden LED indicator will
turn red under this mode. The light will be on at 3 minutes when detecting any movement at night.
Push-button for programmable functions:
- All day mode: light and alarm work on day and night
- Nighttime mode: light and alarm work at night only
Reset function: If the stepper motor of tracking light works abnormal, the hidden LED indicator will flash in red and the
light will stop turning automatically. In All Day mode, the red light will flash for 5 seconds and off for 5 seconds; in
Nighttime mode, the red light will flash in regular pattern. Please simply switch off and on the main power to resume
the tracking light. Below are the possible abnormal situations.
-
External force: the light head is blocked by objects or is blown by strong wind and is unable to turn properly, the hidden
LED will flash in red to signal users the abnormal situation.
-
Stepper motor: when stepper motor is going to be out of its lifetime or is damaged, the hidden LED will flash in red to
signal users the abnormal situation. Please switch off and on the main power, the tracking light now may or may not
resume its operation. If the stepper motor stops working, AEC-9339A becomes a regular motion sensor security light.
Push-button
Left 70
°
Right 70
°
Hidden LED indicator
ZONE 1
ZONE 2
ZONE 3
TOTAL DETECTION RANGE
