Aurora TeamStream TS-100, Руководство пользователя, Страница: 85 / 112

85
USERS GUIDE
www.auroramm.com
“Launcher” firmware:
The TeamStream key fob’s firmware version, i.e. the transmitter version, can be seen in the TeamStream PC
program icon in the status bar, by right-clicking the TeamStream icon and selecting “About”, as shown below:
1.
After you copy “TeamStream.exe” on windows and run the file, the TeamStream PC program icon will be
shown in the status bar.
2. Right-click the icon; this will display a menu, including “Option”, “About” and “Exit”.
3. Click “About”. It will display a message box as shown below:
7.2 Upgrading TS-100:
There are two ways to upgrade the base unit .
The TS-100 device perform a “Full-Update” via a USB drive as follows.
1. Copy the update file, “update.bin”, to the root directory of the USB drive.
2. Connect the USB drive to either USB port of the TS-100 base unit.
Attention: The USB port can only support maximum 500ma. Please use a low power U-disk to update.
3. Connect an HDMI display to the TS-100’s HDMI output port.