8
USERS GUIDE
www.auroramm.com
RXC-4 Front
LEDs
⚫
Status
– Power will light green when unit is on or in standby. Status will blink at a normal pace during
regular operation and slower pace when in standby.
⚫
RS232 TX/RX
– Will blink when RS-232 data is being sent or received.
⚫
RLY
– Will reflect state of relays, On/Closed or Off/Open.
⚫
I/O
– Reflects state of I/O port: On (Input Low / Output High) Off (Input High / Output Low)
⚫
IR
– Reflects IR data activity.
⚫
IR In
– Shows IR Learning Activity
⚫
LCD Display
– Shows IP Address and a variety of diagnostics
Buttons
⚫
Menu
– Press and hold for 5 seconds to factory default all settings.
⚫
Enter
– Press and hold for 5 seconds to default only network settings.
⚫
Arrows
– Press left or right to scroll through the network settings for ports 1 and 2 on the LCD display.
Miscellaneous
⚫
IR Window
– IR learning window next right arrow button.
⚫
USB 2.0 Device Ports
Special Functions
⚫
Factory Default - Press and hold Menu for 5 seconds
Default Settings
⚫
Baud Rate: 9600
⚫
IP Mode: Static (192.168.1.100)