Windows 95B (OSR2)
1. Start Windows, at the Update Device Driver Wizard, you
want to install a Standard PCI Graphics Adapter (VGA) by
clicking on NEXT until FINISH.
2. Provide Windows 95 CD-ROM if prompted and follow on
screen instructions to install the drivers then click OK to
restart Windows.
3. Once Windows is restarted, insert the Driver Installation CD
into CD-ROM. The Setup program should auto launch, If
not then double click on MSSETUP.EXE from the Driver
Installation CD root directory.
4. The SiS6326 Setup will auto detect your Windows versions
and hardware if present then display option menu window.
NOTE If you get warning window MSSETUP, No
hardware device found! Please check your hardware
card first. Make sure card is installed correctly, if
installed correctly then try different slot or exchange
card for new card.
5. Click on
SIS6326 3D Setup
to install the drivers, follow
the on screen instructions to complete installations.
Your Display Adapter drivers are installed.
Windows 98 / 98 SE
1. Start Windows, at the Add New Hardware Wizard, you
want to install a Standard PCI Graphics Adapter (VGA) by
clicking on NEXT until FINISH.
2. Click OK to restart system.
3. Once Windows is restarted, insert the Driver Installation CD
into CD-ROM. The Setup program should auto launch, If
not then double click on MSSETUP.EXE from the Driver
Installation CD root directory.
4. The SiS6326 Setup will auto detect your Windows versions
and hardware if present then display option menu window.
7. Replace the slot bracket's holding screw to secure the board
to the rear slot panel.
8. Replace the computer cover.
The hardware installation have now been complete.
Software Installations
This section will guide you through the installations of the
following driver:
Windows 95/98/98 SE(Second Edition)
Windows NT 4.0
Windows 95 & Window 95a
1. Start Windows, at the New Hardware Found, select Do
not install drivers (Windows will not prompt you again)
then click OK.
2. Click Cancel for Display box then cancel again at the
Display Properties box. If Windows prompt to restart
then click OK to restart Windows.
3. Once Windows is restarted, insert the Driver Installation CD
into CD-ROM. The Setup program should auto launch, If
not then double click on MSSETUP.EXE from the Driver
Installation CD root directory.
4. The SiS6326 Setup will auto detect your Windows versions
and hardware if present then display option menu window.
NOTE If you get warning window MSSETUP, No
hardware device found! Please check your hardware
card first. Make sure card is installed correctly, if
installed correctly then try different slot or exchange
card for new card.
5. Click on
SIS6326 3D Setup
to install the drivers, follow
the on screen instructions to complete installations.
Your Display Adapter drivers are installed.
4
5
