4. Remove any existing video graphics adapters that may be in
the system.
Disable
the motherboard's built-in video, if there
is one.
5. Remove the slot bracket by unscrewing the holding screw
and sliding it out. Save this screw for securing the
Aurora PCI
4MB
after its installed.
Figure 1: Removing the Slot Bracket
6. To install the
Aurora PCI 4MB
, carefully align the cards bus
connector to the PCI slot on the motherboard. Push the card
down firmly, but gently, until it is well seated.
Note
Hold the card by its external edges only. Try to
avoid touching the components, connectors or pins.
NOTE If you get warning window MSSETUP, No
hardware device found! Please check your hardware
card first. Make sure card is installed correctly, if
installed correctly then try different slot or exchange
card for new card.
5. Click on
SIS6326 3D Setup
to install the drivers, follow
the on screen instructions to complete installations.
Windows NT 4.0
1. Start NT 4.0, change the Display Properties to standard VGA
and restart NT.
2. Once Windows is restarted, insert the Driver Installation CD
into CD-ROM. The Setup program should auto launch, If
not then double click on MSSETUP.EXE from the Driver
Installation CD root directory.
3. The SiS6326 Setup will auto detect your Windows versions
and hardware if present then display option menu window.
NOTE If you get warning window MSSETUP, No
hardware device found! Please check your hardware
card first. Make sure card is installed correctly, if
installed correctly then try different slot or exchange
card for new card.
4. Click on
SIS6326 3D Setup
to install the drivers, follow
the on screen instructions to complete installations.
Your Display Adapter drivers are installed.
3
6
Figure 2: Installing the
Aurora PCI 4MB
