Owner Handbook
Aurora Megacube X15
™
4
Revision 1
OPERATING MODES
There are distinct operating modes that are supported by this unit. To select,
use the “MODE” button to enter the menu. The “SETUP” button steps through
specific settings for each operating mode and the “UP” and “DOWN” buttons
chooses from the values available.
IN BUILT PROGRAMS
p r X X
Press “Mode” Button until the display reads PRXX
Press the “Up” or “Down” buttons to select programs PR.01 – PR.09
STATIC COLOUR
1 X X
On PR01 press the “Setup” Button until the display shows “1XX”. By pressing the
Up or Down buttons you can choose from 7 Preset static colours
LED Display Shows
C olour
1
Red
2
Red / Green
3
Green
4
Green / Blue
5
Blue
6
Red / Blue
7
Red / Green / Blue
STROBE & SPEED
S P X X
f s X X
There are additional functions available to the user within the built in programs
On program 1, by pressing the “Setup” button on either of the static colours
you can adjust the brightness of that colour. By pressing the “Setup” Button
again the display will show “FSxx” Here you can set the strobe frequency for
that colour. Press the up and down buttons to adjust the frequency of the
strobe.
Between PR02 – PR10 both the strobe and speed of the program can be
adjusted. Whilst on a program, press the “Setup” button once which will show
“SPXX” By pressing the up and down buttons you can adjust the speed of the
program. By pressing the “Setup” button for a second time the display will
show “FSXX”. By pressing the Up and Down buttons you can adjust the strobe
frequency of the program.
AUTO RUN MODE
a u t o
Press the “MODE” until the display shows “AUTO”. The fixture will auto run between
built in programs PR02 – PR10.
SLAVE MODE
s l a v
Press the “MODE” until the display shows “SLA” to enter into Slave mode.
auto
MODE SETUP
UP
DOWN
ADDITIONAL IN FORMATION
To prevent unauthorised use of the fixture, after 20 seconds of none activity
the fixture will self lock. To unlock the fixture press the “Mode” & “Down” Buttons
together for 2 seconds. You will then be able to access the full functions of the
Fixture
SELF PROTECTION
During long spells of operation on full power, the fixture will adjust the power
consumption to increase the dissipation of heat. Please ensure the fixture is well
ventilated when in use on full power for long spells.
DMX MODE
8.00i
Press the “MODE” button until the display shows “d.001”. Press the “UP” and
“DOWN” buttons to set the individual DMX value between d.001 - d.512.
To select the number of channels, Press the “SETUP” button, then the “UP” and
“DOWN” buttons to cycle through the number of DMX channels you require.
LED Display Shows
DMX C ontrol Mode
1-ch
1 Channel
3-ch
3 Channel
4-ch
4 Channel
6-ch
6 Channel
1 . c h
CH1
1
0
2
1-22
RED
3
23-45
GREEN
4
46-68
BLUE
5
69-91
C YAN
6
92-114
YELLOW
7
115-137
ORANGE
8
138-160
PINK
9
161-183
PURPLE
10
184-206
DARK BLUE
11
207-229
PALE GREEN
12
230-252
WHITE
13
253-255
WARM WHITE
3 . c h
CHANNEL
VALUE
FUNCTION
CH1
0-255
RED
CH2
0-255
GREEN
CH3
0-255
BLUE
4 . c h
CHANNEL
VALUE
FUNCTION
CH1
0-255
MASTER DIMMER
CH2
0-255
RED
CH3
0-255
GREEN
CH3
0-255
BLUE