USERS GUIDE
www.auroramm.com
11
HTW-2 Front & Rear
Front Left Side
•
In1 Button:
The blue backlit button will select the VGA.
•
DB15 VGA Connector:
VGA up to 1080p can be input. The VGA will be converted to HDMI and sent
HDBaseT to the receiver unit. Note: See appendix for pin out information.
•
Line In:
Audio input for the VGA connector sources to be embedded in HDMI
•
Line Out:
Audio output for ARC, Loop out, or Dante option.
•
RJ-45 LAN Connector:
1Gbps locally and 10/100 LAN via HDBaseT receiver unit.
•
IR Window:
Receiver for IR signals from remote ranging between 32KHz to 60KHz.
Front Right Side
•
In2 and In3 Buttons:
The buttons will select between HDMI In2 or HDMI In3 and will light accordingly.
•
HDMI Connectors:
Use with HDMI 2.0 or DVI sources like Blu-ray players, laptops, etc.
•
Dual USB 2.0 Connectors:
USB 2.0 480Mbps and supplies up to 1A of power between both ports.
Great for charging port of USB devices like phones and certain tablets. When in USB Host Mode the
bottom port is for PC (Type A to Type A cable is supplied) and upper port is charging only. When in
Device mode both ports work on a hub for mouse, keyboard, camera, memory stick, etc.
Rear Connections
•
48V DC
: Power connector for 48V DC power supply. If remote device can supply power over HDBaseT
then the local power is not required. Currently all receiver types from Aurora supply power over the
