6
User Guide
OPERATION
LCD Readout
The LCD will reflect what Output is routed to which input when in an idle state.
1-1 If the
input/output is not routed, will show “0”
1-2 Press ENTER will turn to next page to check other status as per 1-3 to 1-8.
1-3 Output Connections shows each output with active connected display. If a slash is
underneath, then nothing is connected. If a destination like a display is present a
“D” will show.
1-4 Input Connections shows each input with active connected source. If a slash is
underneath, then nothing is connected or powered.
If a source like a PC is
connected a “S” will show.
1-5 IP Address
