Aurora Multimedia DIDO LT, Руководство по установке

Страница: 36 / 44

DIDO LT Installation Manual
35
Specifications
Supported Video Timing
Input Format Horiz. Freq. Vertical Freq. Active Resolution Total Resolution Pixel Clock (MHz)
(KHz) (Hz)
525/60 NTSC, ITU-R 15.75/1.001 60.0/1.001 720x480 @ 59.94i 858x525 13.500
BT601-5, RS-170M
525/60 NTSC, CCIR
15.75/1.001 60.0/1.001 720x480 @ 59.94p 858x525 27.000
656
625/50 PAL/SECAM,
15.625 50.000 720x576 @ 50.00i 864x625 13.500
ITU-R BT601-5
625/50 PAL/SECAM,
15.625 50.000 720x576 @ 50.00i 864x625 27.000
CCIR 656
480p 4:3, SMPTE
31.5/1.001 60.0/1.001 720x483 @ 59.94p 858x525 27.000
293M
720p, SMPTE 296M
45.0/1.001 60.0/1.001 1280x720 @ 59.94p 1650x750 74.25/1.001
1080i, SMPTE 274M
33.750/1.001 60.0/1.001 1920x1080 @ 59.94i 2200x1125 74.25/1.001
1080p,
SMPTE 67.4 60.0/1.001 1920x1080 @ 59.94p 2200x1125 74.25/1.001
Note: DIDO LT will accept interlaced signals but will not output interlaced signals. Interlaced
inputs will be de-interlaced and displayed as a high quality progressive signal.
Supported Default DVI/RGB PC Graphics Input & Output Timing
Mode Resolution Horizontal Vertical Pixel Clock (Mhz)
Frequency Frequency
VGA 640x480 @ 60 Hz 800x525 31.469 59.940 25.175
VGA 640x480 @ 72 Hz 832x520 37.861 72.809
VGA 640x480 @ 75 Hz 840x500 37.500 75.000
WVGA 852x480 @ 60Hz 1072x529 31.700 60.000
SVGA 800x600 @ 60 Hz 1056x628 37.879 60.317 40.000
SVGA 800x600 @ 72 Hz 1040x666 48.077 72.188
SVGA 800x600 @ 75 Hz 1056x625 46.875 75.000
XGA 1024x768 @ 60 Hz 1344x806 48.363 60.004 65.000
XGA 1024x768 @ 70 Hz 1328x806 56.476 70.069
XGA 1024x768 @ 75 Hz 1312x800 60.023 75.029
XGA 1024x768 @ 85 Hz 1376x808 68.600 85.000
WXGA 1280x768 @ 60 Hz 1688x802 48.134 60.017 81.25
WXGA 1360x768 @ 60 Hz
WXGA 1366x768 @ 60 Hz
SXGA 1280x1024 @ 60 Hz 1688x1066 63.900 60.000
SXGA 1280x1024 @ 75 Hz 1688x1066 79.900 75.000
SXGA 1280x1024 @ 85 Hz 1728x1072 91.100 85.000
UXGA 1600x1200 @ 60 Hz 2160x1250 76.900 60.000
WUXGA 1900x1200 @ 60 Hz
Note: DIDO LT has the ability to program additional resolutions in User profiles. This can be
found in the Signal Timing OSD section.