~ 12 ~
Method C: Software control through RS-232 or USB port
Software Control Menu
1.
Scan button
Serial Port Scan
Press
Scan
button, the machine will scan the all
com port and show them.
Select the RS232 serial port connected to the
machine. And set device ID 255 is for all device.
Only the same device id or 255 can get the
command you sent.
Press
OK
. Get the new status from the machine
you select.
2.
Setting button
Press
Get
button to read back device ID.
Press
Set
button to write device ID.
3.
Linkage button
Press
Linkage
button to read back all status.
HDMI input
source selection
mapping area
HDMI output
port selection
mapping area
Status Indicator
