~ 5 ~
Front View — Transmitting Unit ASP-CATX1RS-TX
1.
RS-232: Connect to PC serial port with a DSUB-9 male-male cable here
2.
MODE:
A - EDID Full-HD(1080p@60) - 24bit 2D video & 7.1ch audio
B - EDID Full-HD(1080p@60) - 24bit 2D video & 2ch audio
C - EDID Full-HD(1080p@60) - 24bit 3D video & 7.1ch audio
D - EDID Full-HD(1080p@60) - 24bit 3D video & 2ch audio
E - EDID HD(1080p@30)(1080i@60)(720p@60) - 24bit 2D video & 7.1ch audio
F - EDID HD(1080p@30)(1080i@60)(720p@60) - 24bit 2D video & 2ch audio
G - EDID Full-HD(1080p@60) - 36bit 2D video & 7.1ch audio
H – Auto EDID learning
3.
Dip Switch: Setup the RS-232 mode for serial communication channel
4.
HDMI IN:
Connects to a HDMI source with a HDMI male-male cable
5.
IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
6.
IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
Rear View — Transmitting Unit ASP-CATX1RS-TX
7.
+5V DC:
Connect to 5V DC power supply.
8.
HDMI Signal OUT:
Plug in a Cat-5/5e/6 cable to be linked to the transmitting unit ASP-CATX1RS-TX.
Panel Descriptions
