AFT 77 B2
■
10
│
US - EN
Figure B: Outdoor sensor
p
Display
a
Indicator LED
s
Hook
d
TX
button
f
°C/°F
button
g
Battery
compartment
h
Battery compartment cover
j
Stand
k
Wall
anchor
l
Screw
First use
Before first use, insert the battery into the outdoor sensor and then
into the temperature station.
Requirements at the setup location
►
For best selection of the setup location, make sure the devices are
not exposed to direct sunlight, vibration, dust, heat, cold, or humidity.
►
Do not set up the device near sources of heat, e.g. heaters.
►
Mount the outdoor sensor within a maximum radius of 328 ft from
the temperature station. Make sure there are no interfering obstacles
between the outdoor sensor and the temperature station.
Otherwise, there could be transmission interference.
♦
Both the temperature station and the outdoor sensor can be
suspended from a screw using the hooks
z
and
s
.
♦
Alternatively, you can fold out the stand
j
of the outdoor sensor to
set it up on an even, horizontal surface.
IB_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 10
_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 10
10.09.20 15:34
10.09.20 15:3