- 14 -
Get sensor data
The weather station regularly receives the data from the sensors. If the
data reception fails, you may carry out a data update directly by
pressing and holding the ROOM 1, 2 or 3 button
30
. If reception is
successful, the signal reception symbol
17
appears in the display.
Naming the sensors
The sensors can be placed in different rooms or outdoors. It is possible
to assign a name to each sensor on the radio controlled weather
station at
16
. For example, a sensor placed in the bathroom could be
named BATH. When setting the names it is possible to select one of the
pre-set names: BATH, BEDRM, KID1, KID2, YARD. It is also possible to
enter custom names with up to 5 characters each.
Setting pre-set names
\
Room 1
Room 2
Room 3
Room 4
Room 5
DE
BAD
BETT
KIND1
KIND2
GARTN
GB
BATH
BEDRM
KID1
KID2
YARD
FR
BAIN
SOMML
ENF1
ENF2
JARDN
IT
BAGNO SONNO BAMB1
BAMB2
GIARD
ES
BANO
DORMI
NINO1
NINO2
JARDN
DK
BADEV
SOEVN
BARN1
BARN2
HAVE
SE
BADRM
SOEMN
BARN1
BARN2
TRADG
To select a name for sensor 1, press the
1-ROOM
-button
30
. Press the
1-ROOM
-button
30
again to view the different pre-set names. If you
wish to select one of the names, wait for 5 seconds until the selected
name no longer blinks. The name is now set. Select the names for the
other rooms in the same way.
Setting custom names
Custom names can also be set for the sensors. Up to 5 custom names
can be set. When a sixth name is set, the first stored name will by
overwritten automatically. To set a custom name, the letters A-Z, the
special characters , , , , , , , and the numbers 0-9 are
available.
To set a custom name for Sensor 1, please proceed as follows: Press
the
1-ROOM
-button
30
and then immediately press the
up
-button
25
. Press the
up
-button
25
or the
dow
n-button
26
to select a
character. When the desired character appears, press the
1-ROOM
-
button
30
to confirm your setting and move to the next character of 5
possible characters in the name. It is possible to delete characters by
pressing the
SET
-button
32
. Once 5 characters have been entered the
display will automatically return to normal time display mode. If you
have entered less than 5 characters, press the
1-ROOM
-button
30
2x