- 101 -
1
Flu warning
7
°C/°F, down
button
2
Mould warning
8
LED-warning signal
3
Heat warning
9
ALERT ON, OFF
4
Comfort
display
10
ALERT SET, dew
point
5
Indoor
humidity
11
Indoor temperature
6
MAX.MIN, up
button
12
Humidity symbol
Setup
Remove the protective film from the display. Open
the battery compartment (
C
) on the backside of the
climate station.
Insert two 1.5 V AAA R03/LR03 batteries in the
correct polarity
.
Close the battery compartment (
C
).
After inserting the batteries, all display elements are
shown briefly. The alarm will blink briefly and the
climate station will switch to normal display mode.
Basic settings
After inserting the batteries, the climate station is
pre-set to mould alarm 65 %, upper humidity limit
95 % and lower humidity limit 20 %.
