13
GB/IE/NI
Preparing to use
the outdoor sensor
Remove the battery compartment cover
from the back of the outdoor sensor.
Remove the battery safety strip.
The outdoor sensor is now ready for use
and the control LED
29
illuminates briefly.
Close the battery compartment cover.
If this does not work, carry out a restart
of the temperature station if necessary. To
do this, press and keep pressed the
Z
Z
/ REGISTER button
21
(restart the
outdoor sensor only).
Preparing the temperature
station for use
Open the battery compartment
25
on the
back of the temperature station.
Remove the battery safety strip.
Close the battery compartment cover.
Connecting the temperature station
with the outdoor sensor and the DCF
radio signal:
After removal of the battery safety strip, the
temperature station attempts to establish a
connection with the outdoor sensor. This pro-
cess can take a few minutes. The Radio sig-
nal symbol
10
flashes. Once the temperature
station has successfully connected to the out-
door sensor, the Radio signal symbol
10
stops flashing and the temperature is shown in
the LC display.