- 3 -
clean water and immediately seek medical attention. Remove discharged
batteries from the device as they present an increased risk of leakage.
Time setting: wristwatch with date display
To set the time, carefully pull the crown out all the way. Turn the crown clockwise
or counter clockwise to set the time. Carefully press the crown back in halfway to
the case. The date can be set by turning the crown. To finish the setting press the
crown back in all the way.
Turning bezel
2-LD4025-2
Notes on avoiding scratching your watch and the
bands
Place your watch/band on a soft surface to avoid scratching the watch/band
while changing or shortening the band.
Changing the watch band
Use the forked end of the included tool to compress the
spring bar far enough so that the band can be removed.
Please note that the spring bar can easily jump from the band
and get lost. Now insert one end of the replacement band
into the opening between the case lugs of the watch. Use the
fork end of the included tool to compress the spring bar far
enough so that the other end of the spring bar can be
inserted into the opposite opening. Lightly tug at the band to
check if the ends of the spring bar have snapped into the
openings on the case lugs.
Band shortening instruction for metal
straps
Band shortening can be accomplished by removing links. Open the band clasp
safety and open the clasp. The band is held to the clasp by a spring bar.
Image
1.
compress and remove the spring bar by using a pointed tool. Now place the
watch face down on a soft surface.
Image 2.
The links that can be removed are
marked with an arrow.
Image 3.
Place the band in the band shortening tool in
such a way that the pointed end of the tool points directly at the metal rod. Turn
the screw in the direction of the arrow until the metal rod is pushed out a small
Turning
bezel
- 4 -
distance. The rod can now be pulled out (using pliers if necessary). The strap can
now be taken disassembled. Remove as many links as necessary using this
method. Reinsert the rod in the opposite direction of the arrow and push it back
into the band. The strap and clasp can now be reassembled.
An instructional video is available for online viewing at the following URL:
http://www.lidl.com/nou9nohN
...or simply scan the following QR code:
Replacement of battery (SR626SW)
Battery replacements must be performed by an expert to avoid damaging the
case or gaskets.
Cleaning instructions
Clean the wristwatch with a soft, dry and lint-free cloth. A glasses cleaning cloth is
ideal.
Water resistance
Water resistant up to 3 bar. The bar value specifies the atmospheric overpressure
which is applied during testing (DIN 8310).
Disposal of the watch
This wristwatch may not be disposed of with normal household waste.
Dispose of the wristwatch at an approved disposal facility or at your
local recycling centre. Please observe the current rules and regulations
when disposing of the watch. Contact the disposal system if in doubt.
Disposal of the batteries
Please dispose of your batteries properly in containers especially set
up at retailers. Batteries do not belong in household waste. Dispose of
the batteries at an approved disposal facility or at your local
recycling centre. Contact the disposal system if in doubt.
digi-tech gmbh warranty
This wristwatch includes a 3 year warranty starting on the day of purchase. In
case of defects of this wristwatch you have, by law, certain rights regarding the