XTR-8LR-USB
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
User Manual
The technical features can change without forecasting. AUR°EL S.p.A doesn’t assume any responsability of demage due to the improper use of the device.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
AUR°EL S.p.A.
Via Foro dei Tigli, 4 - 47015 Modigliana (FC) – ITALY
Tel.: +39.0546.941124 Fax: +39.0546.941660
http://www.aurelwireless.com
- email:
Rev 1.3 18/11/2019
Page
8
of
17
3.
Open a communications software to serial ports, we recommended to use RealTerm free download on
the following link:
http://sourceforge.net/projects/realterm/files/Realterm/
All the examples cited in this manual have been performed with Realterm.
Many communication programs are available for serial ports suitable for this purpose, however, in
order to exclude errors introduced by them and to get adequate support from the vendor, it is
recommended to perform the experiments described below using Realterm, at least until it reaches an
appropriate level of confidence with the XTR-8LR100 form or XTR-8LR10.
4.
Start the program and set the communication parameters as shown below.
Communication speed 115200 bps, the START bit, 8 data bits, and a STOP bit, no parity. Select the
port number that has been associated with XTR-8LR-USB, in this case the port associated with the
XTR-8LR-USB is the "Port 109".
After each change of the working parameters of the serial port, remember to press the button "Change"
to Realterm, the set values are visible at any time in the small box at the bottom right of the screen
Realterm.
