XTR-8LR-USB
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
User Manual
The technical features can change without forecasting. AUR°EL S.p.A doesn’t assume any responsability of demage due to the improper use of the device.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
AUR°EL S.p.A.
Via Foro dei Tigli, 4 - 47015 Modigliana (FC) – ITALY
Tel.: +39.0546.941124 Fax: +39.0546.941660
http://www.aurelwireless.com
- email:
Rev 1.3 18/11/2019
Page
10
of
17
If never used it shall respond with the default settings tab.
7.
Change the desired parameters, type the ATCC command to exit the state of the Command Mode, or
ATWR to save the new parameters on EEPROM and exit the command mode, as a confirmation of the
command, the XTR-8LR-USB will respond with OK EXIT and red LED turns off (see below).
Once out of the Command Mode will recover in Normal receive mode (Blink RED LED every 3
seconds)
