MAG 4M 5026
User Manual
Magnetic contact with radio transmission
The magnetic contact wireless MAG 4M 5026 is a sensor able to detect opening or closing doors or windows
and transmits via radio a alarm signal. It is composed of two distinct elements: a case containing the
magnetic contact and electronic card normally placed on the frame of the fixture and a small permanent
magnet to fit on the mobile element of the fixture. The working is based on the closing and opening of a
sensor capable to operate within a 5mm radius from the permanent magnet.
MAG 4MHCS is battery power supplied and designed to ensure autonomy of 3-5 years, it is always internally
controlled by a meter charge that forwards via radio the battery life time and warns by a beeper and LED,
the alarm of discharged battery.
The radio transmission operates in the 433.92 MHz ISM band with fixed coding settable by a 9 tree-state
vias dip-switch, features as shown in CI 145026. It starts when the magnet is removed from electrical side
to indicate the alarm condition.
It’s available a led to indicate the radio transmission, alarm and test.
Fig.1
Fig. 2 – Electronic card inside the case
1.
Reed:
magnetic sensor
2.
Magnet:
magnet
3.
Dip-switch:
9 tree-state vias to set radio code
4.
JP1
and
JP2
:
Setting mode (see "Sensor Configuration) (see the paragraph “HOW IT WORKS”)
5.
Battery:
Rechargeable lithium type mod. CR2032.
6.
LED:
light signals (see signaling)
The technical features can be change without forecast. AUR°EL S.p.A doesn’t assume any responsibility for the demages due to the improper use.
AUR°EL S.p.A.
Via Foro dei Tigli, 4 - 47015 Modigliana (FC) – ITALY Rev.A 11.06.2014
Tel.: +390546941124 – Fax: +390546941660 Page 1 of
7
http://www.aurel.it
- email:
Preliminary
