AURATON S03 RT, Руководство пользователя

Страница: 14 / 24

14
Pairing of the wireless AURATON S03 RT
controller with the AURATON RT receiver
After the receiver is connected to the network, the receiver must be switched
on by quickly pressing the power button ( ). If the device is switched on,
the green power supply diode becomes illuminated and a single sound signal
is emitted. In order to switch off the receiver, e.g. outside of the heating
season, press the power button and hold it for 3 seconds until a double
sound signal is audible and the green power supply diode is switched off and,
consequently, the heating device is switched off.
NOTE: If the wireless controller AURATON S03 RT is sold together with the
AURATON RT receiver, the two devices are factory-paired. Devices
purchased separately must be paired.
1.
Pairing of the AURATON S03 RT controller with the AURATON RT receiver
is initiated by pressing the right pairing button ( ) – a single sound signal
is emitted – on the AURATON RT receiver and by holding it pressed for at
least 3 s until the LED diode starts blinking with green light (double sound
signal) – then the button must be released.
The receiver waits for pairing for 120 seconds. After this period, it auto -
matically returns to normal operation.
2. On the receiver, press the button for 5 seconds until the transmis -
sion ( ) symbol on the display is illuminated. Release the button – the
controller emits the pairing signal for 5 seconds.
3. Successful end of pairing is indicated by the LED diode on the receiver
no longer blinking green and the receiver switching to normal operation.