13
Power Up and Sleep
VEGA G2 will power up automatically after the main power on the back of the unit is
switched on. To put the device into sleep mode, please press and hold the rotary knob
for a couple of seconds till you see confirmation message, select yes and press the knob
to confirm your operation. To bring the unit back to work in sleep mode, please press
the rotary knob briefly.
You can also use Smart-IR function to assign remote button for function. Please refer to
‘Smart-IR Remote Control’ on page
23
for detailed instruction.
Welcome Screen
VEGA G2 has two different main display styles depends on what input channel you are
using.
•
Using VEGA G2 with streaming input channel
When the VEGA G2 while using the streaming input channel, you are greeted by the
Welcome Screen (above), which displays your device model, device firmware version
and the IP address of your device. Refer to page
19
for details on accessing the web
interface to set up your device using its IP address.
You may press the rotary knob to leave the Welcome Screen and go to the Home Menu.
If you select a track to play using control software, VEGA G2 will jump to the ‘Now Playing’
screen automatically.