background image

Installation Guidelines

Thank you for Purchasing 

Auralex

®

 Total Sound Control

® 

Products!

Elite Pro System EPS-168T Components

Congratulations  on  purchasing  an  EPS-168T

  System  from  Auralex

®

  Acoustics.  You’re 

now on your way to creating a world class listening environment. 

Elite Pro Systems offer a sophisticated look by utilizing products covered with specialized 

acoustical fabrics. The EPS-168T system contains B22 ProPanels

, CT45 Bass Traps

 and 

ProFusors

, which when used together, provide incredibly effective acoustical control in 

any room. Use the EPS-168T alone for treatment of small to medium-sized rooms or in 

combination with other Auralex products for full control of larger spaces.

B22 ProPanels

20

Impaling Clips

80

CT45 Bass Traps

8

Elite Pro Systems

EPS-168

T

ProFusors

6

Z-Clips

48

Tubetak Pro™

2

845-606 | Rev. 1 | 070506 EF

Содержание Elite Pro Systems EPS-168T

Страница 1: ...by utilizing products covered with specialized acoustical fabrics The EPS 168T system contains B22 ProPanels CT45 Bass Traps and ProFusors which when used together provide incredibly effective acoustical control in any room Use the EPS 168T alone for treatment of small to medium sized rooms or in combination with other Auralex products for full control of larger spaces B22 ProPanels 20 Impaling Cl...

Страница 2: ...in marked B22 ProPanel location using drywall screws Exact placement of each clip is not necessary Mark intended location of each B22 ProPanel on the wall or ceiling Marked panel outline Start the B22 ProPanel 5 8 above its intended final height and press downward at a 45 angle until the panel is flush with the wall surface TIP For permanent mounting apply Tubetak Pro adhesive to the back of the B...

Страница 3: ... nail is installed perpendicular to the wall surface Repeat in each of the four corners Using a nail set or other finish nail carefully countersink installed nail so its head goes through the fabric surface of the CT45 but not through the hardened edge Once finish nail has been countersunk into the panel there may be a small hole remaining in the fabric covering Simply scrape the fabric in this ar...

Страница 4: ...tline mark another rectangle 4 in from both sides 5 25 down from the top and 2 75 up from the bottom Install one Z Clip in each corner of the marked inner rectangle using drywall screws as shown Hold the ProFusor to the wall or ceiling in its intended location with the back facing out Make sure diffusor is level Completely trace its outline 4 5 25 2 75 4 Marked inner rectangle Traced ProFusor Outl...

Отзывы: