I.Safety Precautions
In order to ensure that you use this product correctly and safely and avoid injury to you and
others, please read this manual carefully and observe the following safety precautions:
1. The use of this product must use a suitable power outlet. lfyou find that the plug does not match your
socket, ask a professional electrician to install the appropriate socket for you, please do not modify the plug
itself in any way.
2. Before connecting the product to the power supply, first confirm whether the voltage marked on the
product is consistent with the local voltage.
3. When the power cord is damaged or the plug is worn, do not use it, please go to the repair point
designated by the manufacturer to replace it.
4. Do not pull out the plug by pulling the power cord. The correct way is to hold the plug tightly and pull
it out from the socket.
5. lfit is not used for a long time, the plug must be pulled out to avoid electric shock and other accidents.
6. The power cord plug should be kept in firm contact with the socketto avoid fire.
7. When there is a leakage offlammable gas such as gas, do not unplug the machine.
8. Please unplug the power plug in advance for cleaning, maintenance, filter replacement, etc. to prevent
electric shock.
9. Do not block the air inlet and air outlet, so as not to block the normal air outlet.
10. This product is designed with casters. If you need to move the product, please hold the handle of the
product to push it.
Prohibited Matters:
(S)
Do not use non-standard power cords.
(S)
Do not hit the machine violently.
(S)
Do not store in high temperature (60
°
C) environment.
(S)
Do not disassemble the main unit without authorization (except for some operations allowed in
the manual).
(S)
Do not come into contact with flammable substances or ignition sources.
Precautions:
CD
Do not use insecticides and the like when this product is running, otherwise the chemical
components will accumulate inside the machine, which will be detrimental to human health.
CD
After power-on, the operation panel and the display screen are all on for 2 seconds and then
off, and a long beep is heard at the same time; when the machine is turned on, the PM2.5
sensor reading has a certain lag, please wait patiently for 10s. These are normal phenomena.
CD
The product is not intended for use by persons (including children) with limited physical,
organ or mental abilities or lack of experience and knowledge, unless they are under the
supervision of another person responsible for safety or provided instructions for the use of
the product are provided.
CD
This product is to be used only with the power cord supplied with this product.
CD
Due to product updates and iterations, if there is any difference in this manual, please refer to
the actual product.
CD
When the active oxygen function is turned on, all personnel must evacuate the site.
1
READ AND SAVE THESE INSTRUCTIONS
