TM6400 FLOW MONITORING SYSTEM
TM6400 Installation & User guide
5
|
P a g e
INSTALLATION
P
OSITIONING YOUR SYSTEM
The TM6400 being a control system, should receive the same
installation considerations as an alarm system. It should be installed
in such a way as to be tamper proof that you choose to install it at the
bar, outside the beer cooler or, in the manager’s office. Cables and
connections should be protected and secured out of reach. The
power source should not be installed where it can easily be
disconnected
. Do not connect the TM6400 power source to an
electrical outlet that can be turned off at night.
COMMUNICATION
The TM6400 is equipped with two programmable serial ports and an
Ethernet adapter to connect it to a computer network.
The RS-422 port serial port connector is a RJ11 jack (phone jack).
The RS-232 port connector is a Dsub 9 pin connector (male)
RS-422 SPECIFICATIONS
Standard EIA
RS-422 Physical Media Twisted Pair Network
Topology Point-to-point
Maximum Distance
RS-422 1000 metres (3000 ft)
Mode of Operation
Differential
Maximum Baud Rate RS-422
115.2 Kbytes
