TM6400 FLOW MONITORING SYSTEM AND TRANSMITTER
TM6400 Installation & User guide
12
|
P a g e
POWER UP AND SET UP
The button serves several functions.
1. The numbers will be used for passwords.
2. Arrow signs pointing left and right will be used to move the
cursor, select the line numbers or ports viewed.
3. The minus and plus sign are used to increase or decrease
values.
4. The E (enter) button will be used to validate a choice.
5. The M button will be used to change mode.
6. The LED will blink in case of power loss.
Passwords:
Two different passwords can be programmed
Administrator
Line cleaning
The default factory passwords are
1 2 3 4
followed by E
(enter).
PRESS AND HOLD M and then Press E to enter the programming
modes.
You will be asked to enter a password after your selection.
1.RESET COUNTERS
Press 1 followed by the password and press E.
The system will clear the 64 counters. The counters should not be
cleared when using the software.
