23
EN
Playing records
• Press the Power ON/OFF button on the back of the unit to turn it on.
• Open the turntable cover slowly.
• Place a record on the turntable. When playing a 45 RPM large-hole
single record, use the included adapter.
• Set according to the rotation speed (RPM)of the record. The rotation
speed can be set to 33 1/3 or 45 RPM.
• Turn the START/STOP rotation knob to START to start the turntable.
• Move the tone arm clasp to the right to release the tone arm.
• Lift the cue lever.
• You can also leave the cue lever down and moved the raised tone arm
over the record and then lower the tone arm slowly to start playback.
• Move the tone arm to the edge of the record or the track where you
want to start playback.
• Lower the cue lever.
• Lower the tone arm slowly until the stylus touches the record and
playback begins. We recommend that you close the turntable cover
during record playback to avoid dust.
•
Do not place anything on the turntable cover. Objects on the cover
might cause noise due to vibrations or fall off, especially during
playback.
•
When playback finishes slightly lift the cue lever or the head-shell hook
and return the tone arm to its resting position.
• Turn the START/STOP rotation knob to STOP to stop the turntable.
Caution
• During playback, do not touch the tone arm or the rotating record.
• Do not stop turntable rotation during playback.
• During record playback, feedback could occur if the volume is too loud.
If this happens, lower the volume of the amplifier.
