![auna Spacewoofer Скачать руководство пользователя страница 30](http://html1.mh-extra.com/html/auna/spacewoofer/spacewoofer_instruction-manual_3016785030.webp)
30
EN
Intro play
1 Press the PROG./P-MODE/MEM. button (7) on unit or P-MODE key (8)
on remote control in play mode till the “INTRO” shows steadily on the
display, the intro play will start and scan 10 seconds for every track.
2 To cancel intro play, press the PROG./P-MODE/MEM. button (7) on unit
or P-MODE key (8) on remote control again until “INTRO” disappear
from the display.
USB
•
Press the Function selection button (15) on unit to select “USB” mode.
• Connect the USB device to the USB input (1). The LCD will show the total
number of tracks stored in the USB. The playback starts from track 1
automatically after reading the USB.
• To pause playback, press the Pair button (16) on unit or the PAIR key (10)
on remote control, the current playing time will flash on the display. To
resume playback, press the button again.
• Press the Pair button (16) on unit or the PAIR key (10) on remote control
to stop playing. The display will show total number of USB and “STOP“.
•
The different selection modes Proceed program play/Repeat play
(repeat 1 - repeat folder - repeat all)/Random play/Intro play operation
as the same described above in the “CD/MP3” section.
Note:
Do not use any USB extension cable for connecting the USB
device as it may cause interference.
BT
• Press the Function selection button (15) on unit or the FUNC button (1)
on remote control to switch to BT function, the LCD will display “BT ”
and the Pair indicator (27) will flash at high speed.
•
Turn on the BT function on the device, scan the unit “Spacewoofer” and
connect, then input the password “0000“ if required, the Pair blue light
will light up to indicate connection done, and the display will show “BT”.
Press the Play/Pause/Pair button (16) on the unit or the Play key
(7) on the remote control to start playback. If the unit can‘t connect the
relative BT within 2 minutes, press the Play/Pause/Pair button (16)
on unit or the PAIR key (10) on remote control to reconnect.
• Rotate the Volume knob on unit or adjust the volume on the BT device
to your desired level.