9
Description & Operation
Operation
1. Rotate the
ON-OFF VOLUME SWITCH
located on the front panel to switch the unit ON.
2. Release the
TONE ARM
from the
ARM LOCK
and place it on the
ARM REST.
Important:
The
ARM LOCK
is taller than the turntable and needs to be folded down to allow
larger records to be played.
3. Set the
SPEED CONTROL SWITCH
to the desired speed (331/3, 45 or 78rpm).
4. Place the record on the turntable.
5. Lift the
TONE ARM
and move it by hand to the record and slowly lower it onto the desired starting
point. The turntable will start turning automatically.
Note:
At the end of the record, the turntable will still be rotating. You must lift the
TONE ARM
and return it back to the ARM REST manually.
6. Re-adjust the
ON-OFF VOLUME SWITCH
to the desired sound level and rotate the
TONE
CONTROL SWITCH
as required.
Note: After use and removing the record, always push the ARM LOCK upwards again before
placing the
TONE ARM
back on it – then lock it and close the cover.
Accessory: Spindle adaptor for 45rpm records
Note:
The spindle adaptor disc is stored on the turntable deck and should only be used if the centre clip
on the 45rpm record is missing!
1. Place the 45rpm adaptor on the spindle before placing the record on the turntable.
2. Place your 45rpm record onto the turntable.
3. Follow the steps under TURNTABLE OPERATION to play your record.
