8
www.auna.de
ANOTHER ADJUSTMENT
You can adjust the tone sound by Tone control (10) or pitch by Pitch Adjust (3) for different music enjoyment.
AUX-IN Connection
Connect the unit to other device by connecting the Aux in jack (15) with a 3.5mm cable(not provided) and
other end connect to the external device such as Discman/MP3 player to perform the music playback
or encoding function etc.
1. Slide the Power On/Off switch (6) to On position
2. Volume Control Knob (9) to desired volume level.
3. Start to play your external device.
Connecting to a Computer for Recording
Before getting start, please install the “ AUDACITY ” recording software to your computer. Below is an
example using a computer with Microsoft XP and the Audacity software installed. For more options,
please refer to Audacity software guide separately.
1. Turn on your computer and allow it to boot fully. Turn the unit power ON, connect the USB port(17)
from the unit to your computer via the USB cable provided. The unit connected to your PC will be
recognised as a USB device.
2. Open the “ AUDACITY ” program. Under the “ EDIT ” tab, select “ PREFERENCES ”.
3. Click the “DEVICE” tab and then choose the “USB Audio Controller” at Recording and Playback
device section
4. Select Channels “2 (STEREO)” and then click “OK” to close preference setting window.
5. Play the music such as Aux in/Phono to be recorded into the computer.
6. Click the red Record button on the software control panel. You will see a waveform moving and can
listen to the record playing through computer speakers.
7. When you have finished the recording, click the yellow Stop button on the software control panel.
8. Now click “FILE ” and choose to save your recording file.
9. Click the green Play button to playback your finished recording.
NOTE: Free software (AUDACITY) licensed under the GNU general public license (GPL).
More information as well as open source code can be found on the provided CD or on the website at:
http://audacity.sourceforge.net/
