7
www.auna.de
Precautions for Use
Installation
• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connec-
tions have been made.
• Do not cover any vents and make sure that there is a space of several centimeters around the unit for
ventilation.
Connection
1. Connect the Power Cord (16) to an AC outlet.
2. To encode the Vinyl or Aux in signal to your computer, connect the USB Port (17) of the Turntable to
a suitable USB port on your computer via the USB cable provided.
3. Turn on the power by Power On/Off switch (6) and the power LED indicator (5) will light up, your
system is now ready to play your music. Please refer to the Operations section of this Manual for
details.
Stereo Phonograph Operation
• Remove the stylus protector.
• Make sure that the tone arm is unlocked and free to move from the tone arm rest prior to operating.
Lock the tone arm again when not in use.
1. Slide the Power On/Off switch (6) to On position
2. Raise the turntable dust cover.
3. Place the record on the platter (use the 45 RPM record adaptor (11) if you are playing 45 RPM re-
cords).
4. Set the speed selector (12) to the proper position for the record you are playing.
5. Lift the tone arm from the rest (13) and slowly move it over the record. The platter will begin spin-
ning.
6. Place the tone arm down onto the record in the location that you want to play.
7. Adjust the volume (9) to the desired level.
8. At the end of record, the platter will automatically stop spinning. Lift the tone arm from the record
and return it to the rest.
9. To stop playing manually, lift the tone arm from the record and return it to the rest.
NOTE:
Some types of records may have an auto-stop area outside the preset limit, so the turntable may stop
before the last track finishes. In this case, set the AUTO-STOP switch (7) to the “OFF” position. This al
-
lows the record to play to the end, but please note that it will not stop automatically. You must manually
raise the tone arm and place it back in the rest and then turn off the power to stop the turntable from
spinning. Due to Aux and Phono were designed at the same channel of this system. When Aux in jack
(15) plugged by 3.5mm stereo plug. The channel will change to Aux automatically and turntable will stop
to rotate. Please ensure the Aux in jack (15) without plugged by anything before playing Phono.
