19
EN
FIRST STEPS
Power supply
A mains adapter with an output power of 5 V DC 1 A (included in the scope
of delivery) is required for using the unit. Follow the steps below to connect
the mains adapter to the unit and a power socket:
1. Plug the DC adapter into the DC IN connector on the back of the unit.
2. Insert the power plug of the power adapter into a grounded socket.
Turn the volume control (10) clockwise to switch on the unit. The power
indicator will light up.
USE
Ensure the following before first use:
• Remove the needle guard.
• Make sure that the tone arm can be moved down freely from the tone
arm holder. Secure the tone arm on the tone arm bracket when the unit
is not in use.
Record playback
1. Move the function selection switch to the 'PHONO' position and remove
the dust cover (11).
2. Place a record over the central spindle on the turntable (1). Place an EP
adapter on the central spindle when playing 17 cm EP records.
3. Use the speed selector (5) to set a speed of 33, 45 or 78 RPM,
depending on the record.
4. Lift the tone arm (3) from the tone arm mount with the lever (4) and
move it carefully over the record. The turntable (1) will start to rotate.
5. Place the tone arm (3) in the desired position on the record.
6. Lower the tone arm (3) carefully onto the record to start playback.
7.
As soon as the record is finished, the tone arm (3) will stop
automatically. Lift the tone arm (3) off the record and secure it on the
tone arm holder.
8.
For manual stop, lift the tone arm (3) off the record and secure it on the
tone arm holder.
