16
EN
SAFETY INSTRUCTIONS
General instructions
•
Lightning
- If you do not use the device for a longer period of time or in
the event of electrical storms, unplug the device from the power outlet
or disconnect the device from the antenna connection. This prevents
damage to the product due to lightning and overvoltage.
•
Overloading
- Do not overload electrical outlets, extension cords or
integral sockets as this may result in a fire or electric shock
.
•
Foreign objects and liquid entry
- Never push objects of any kind into
the unit through openings as they may touch dangerous voltage points
or short out parts that could cause a fire or electric shock. Never spill
liquids of any kind on the unit.
•
Repair and maintenance
- Do not attempt to service this product
yourself as opening or removing covers may expose you to dangerous
voltages or other hazards. Leave all maintenance work to qualified
service personnel.
•
Damage requiring servicing
- Unplug the appliance from the wall
outlet and refer servicing to qualified service personnel when any of the
following situations occur
:
a) If the mains cable or plug is damaged.
b) If liquid has been spilled or objects have fallen onto the product.
c) If the product has been exposed to rain or water.
d) If the product has been dropped or damaged.
e) If the product has a significantly reduced performance.
•
Spare parts
- If spare parts are needed, make sure that the specialist
company replacing the parts only uses spare parts that are approved by
the manufacturer or have the same characteristics as the original part.
Unauthorised substitutions may result in fire, electric shock or other
hazards.
•
Heat
- Do not install near any heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers).
