15
ENG-11
Environmental information
All unnecessary packaging materials has been omitted. The packaging can be easily separated into three
materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a specialized company. Please
observe the local regulations regarding the disposal of packaging, dead batteries and old equipment.
Specifications
(The technical characteristics are liable to change without notice)
Power Supply
Power Consumption
Dimensions
Weight
Frequency Range
Output Power (RMS)
Earphones Jack
Mains: AC 230V~50Hz
Battery: DC 9V (6xUM-2, batteries not included)
: 10W
: 260(L) x 205(W) x 155(H) mm
: 1.73 kg
: FM 88-108MHz
: 1.2W x 2
: 3.5mm
Recycle
This symbol bears the selective sorting symbol for waste electrical and electronic
equipment (WEEE). This means that this product must be handled pursuant to
European Directive 2002/96/EC in order to be recycled or dismantled to minimize its
impact on the environment. It should be disposed at the end of its life separately from
your household waste. There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you
purchased the product.
Electronic products not included in the selective sorting process are potentially
dangerous for the environment and human health due to the presence of hazardous
substances.
This mark is applied to show the equipment conforms to European safety and
electromagnetic compatibility standards.
Notes for battery disposal
The batteries used with this product contain chemicals that are harmful to the environment. To
prevent our environment, dispose of used batteries according to your local laws or regulations.
Do not dispose of batteries with normal household waste.
For more information, please contact the local authority or your retailer where you purchased the
product.
ENG-12
PCD-3300USB ENG IB (2013 ErP)-R0 (20121026)
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following hints, consult your dealer or service center.
Note:
Do not open the unit as there is a risk of electric shock. Under no circumstances should you try to
repair the set yourself; as this will invalidate the guarantee.
No power
E
·
nsure that the power cord is connect securely.
E
·
nsure that there is power at the AC Mains.
E
·
nsure that the batteries are inserted correctly.
No sound or poor sound
A
·
djust the volume.
No response from the unit
D
·
isconnect and reconnect the AC power cord, then turn on the unit again.
E
·
lectrostatic discharge, re-connect the AC power cord after a few seconds.
CD does not play
T
·
he disc is dirty. Clean the CD.
T
·
he disc is placed upside down. Remove and place the CD right side up.
U
·
se a finalized CD or correct format disc.
The CD skips tracks
E
·
nsure that the CD is not damaged or dirty.
E
·
nsure that program mode is deactivated.
Poor radio reception
E
·
lectrical interference in your home can cause poor reception. Move the unit away from them (especially
those with motors and transformers).
F
·
ully extend the telescopic antenna.
Poor cassette sound quality
D
·
ust and dirty on the heads, etc. Clean deck parts, see Maintenance.
U
·
se of incompatible cassette types (METAL or CHROME). Only use NORMAL (IECI) for recording.
The unit does not function properly while using batteries
B
·
atteries are dead. Replace the new batteries.
T
·
he polarities of the batteries are incorrectly positioned.
R
·
einsert the batteries ensuring the polarities (+/-) match the unit's indicated polarities (+/-).
File from USB device does not play
C
·
heck the file format. This product only support MP3 format.
Remarks:
I
·
f the unit is not used for 30 minutes or more, it will automatically enter
STANDBY
mode. Press the
PROGRAM/RESTART
button to resume use.
I
·
f any anomaly occurs, switch the
FUNCTION Selector
to the
TAPE(OFF)
position, and then switch it
back to CD/MP3/USB or FM ST. position again.
