manualshive.com logo in svg

AUMA SAEx 07.2, Руководство пользователя

Поделиться
Скачать
AUMA SAEx 07.2 Скачать руководство пользователя страница 43

8.

Indications

8.1.

Indications during commissioning

LED test

When switching on the power supply, all LEDs on the local controls illuminate for
approx. 1 second. This optical feedback indicates that the voltage supply is connected
to the controls and all LEDs are operable.

Figure 43: LED test

Language selection

During the self-test, the language selection can be activated so that the selected
language is immediately indicated in the display. For this, set selector switch to
position 0 (OFF).

Activate language selection:

1.

Display indicates in the bottom line:

Language selection menu? 'Reset'

2.

Hold down push button RESET until display of the following text in the bottom
line:

Language menu loading, please wait

.

Figure 44: Self-test

The language selection menu follows the startup menu.

Startup menu

The current firmware version is displayed during the startup procedure:

Figure 45: Startup menu with firmware version: 05.00.00–xxxx

If the language selection feature has been activated during the self-test, the menu
for selecting the display language will now be indicated. For further information on
language setting, please refer to chapter <Language in the display>.

Figure 46: Language selection

If no entry is made over a longer period of time (approx. 1 minute), the display
automatically returns to the first status indication.

8.2.

Indications in the display

Menus and functions depend on the actuator controls firmware version!

→

Should menus or functions be unavailable, please contact the AUMA Service.

43

SAEx 07.2 – SAEx 16.2 / SAREx 07.2 – SAREx 16.2 Control unit: electronic (MWG) 
ACExC 01.2 Non-Intrusive Modbus TCP/IP 

Indications

Содержание SAEx 07.2

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды