manualshive.com logo in svg

AUMA SA 25.1, Руководство по эксплуатации, Страница: 29 / 48

Поделиться
Скачать
AUMA SA 25.1 Скачать руководство пользователя страница 29

3.

With indicator disc:

→

Observe direction of rotation.

➥

The direction of rotation is correct, if actuator runs in direction

CLOSE and indicator disc turns counterclockwise.

4.

Without the indicator disc:

→

Unscrew threaded plug [1] and seal [2] or cap for stem protection tube [4]

and observe direction of rotation at hollow shaft [3] or the stem [5].

➥

The direction of rotation is correct, if actuator runs in direction CLOSE and

hollow shaft or stem turn clockwise.

Figure 30:

Hollow shaft/stem

[1]

Threaded plug

[2]

Seal

[3]

Hollow shaft

[4]

Cap for stem protection tube

[5]

Stem

[6]

Stem protection tube

9.5.2

Limit switching: check

1.

Move actuator manually into both end positions of the valve.

➥

The limit switching is set correctly if:

-

LSC switch trips in end position CLOSED

-

LSO switch trips in end position OPEN

-

the switches release the contacts after turning back the handwheel

2.

If the end position setting is incorrect: Reset limit switching.

3.

If the end position setting is correct and no options (e.g. potentiometer, position
transmitter) are available: Close switch compartment.

29

SA 25.1 – SA 48.1/SAR 25.1 – SAR 30.1

Commissioning

Содержание SA 25.1

















































Отзывы:

Нет отзывов