AUMA SA 25.1 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 48

AUMA SA 25.1 Скачать руководство пользователя страница 18

In case of a fault: Hazardous voltage while protective earth conductor is NOT
connected!

Risk of electric shock.

→

Connect all protective earth conductors.

→

Connect PE connection to external protective earth conductor of connecting
cables.

→

Start running the device only after having connected the protective earth con-
ductor.

5.

Tighten PE conductors firmly to PE connection using ring lugs (flexible cables)
or loops (rigid cables).

Figure 15:

PE connection

[1]

Socket carrier

[2]

Screw

[3]

Washer

[4]

Lock washer

[5]

Protective earth with ring lugs/loops

[6]

PE connection, symbol:

Danger of motor damage if PTC thermistors or thermoswitches are not
connected!

Our warranty for the motor will lapse if the motor protection is not connected.

→

Connect PTC thermistors or thermoswitches to external controls.

Danger of corrosion: Damage due to condensation!

→

After mounting, commission the device immediately to ensure that heater mini-
mises condensation.

Information

Some actuators are equipped with an additional motor heater. The motor heater

minimises condensation within the motor and improves the start-up behaviour for

extremely low temperatures.

18

SA 25.1 – SA 48.1/SAR 25.1 – SAR 30.1

Electrical connection

«
...
16
17
18
19
20
...
»

Содержание SA 25.1

















































Отзывы:

Нет отзывов