Aukey VT-CM1, Руководство пользователя

Страница: 5 / 10

- 04 -
Wireless Connection
*Wireless Network Indicator will flash green 3 times every 3 seconds once successfully connected.
1. Click Wi-Fi icon 4. Wi-Fi is connecting 2. Use the included pin to press
reset button for a few seconds
until you hear a voice prompt
3. Click the button "Already
heard the voice hint"
5. Wi-Fi connected 6. Change password 7. Click “Ok”
Networking mode
Your device is not online,please select the
networking mode
Smart Wi-Fi Setup
No Ethernet cable needed
Wi-Fi Prerequisites Wi-Fi connection
Please press RESET button 1 second and
then take off,after listen the voice hint,WI-
FI lights start flashing in red and green,see
the above pictures
Ethernet Setup
Ethernet cable needed for setup only
Already heard the voice hint
Sound is helpful for Wi-Fi connection
please keep the phone speaker close to
the camera’s mic
Camera Router Server
177s
Wi-Fi connection QR code connection
Wi-Fi connection
Wi-Fi connection QR code connection
Configuration success
Modify Password
Device ID :1jfiegbp3fzxq
Your password of device is too simple,
please modify password. New password
shall not be less than six characters.
Device ID :1jfiegbp3fzxq
Camera Router Server
136s
Change
OK
1
、
Add device
2
、
Modify password
3
、
Config Wi-Fi
Success
Success
Success
Finish