Motion detection mode is power efficient because the camera only operates
when triggered and for short periods at a time
The hardwire kit automatically cuts off power if battery voltage drops to 11.6V, to
protect the car battery and avoid excessive discharge. However, it is advisable to
disconnect power by unplugging the OBD-II DLC port adapter when the car is
parked or stored for longer periods
●
●
Parking Mode
All AUKEY dash cameras and many other dash cameras feature a motion
detection recording mode (parking mode). With this mode switched on and
the hardwire kit successfully installed, your dash camera will start recording
when motion is detected within 2 – 3m / 6.56 – 9.84ft. The hardwire kit motion
detection sensor provides 360° detection for improved coverage compared to
dash camera visual detection. The camera will operate even when the car
ignition is turned off.
Notes
- 04 -
