Auga VarioPress 14000, Руководство по эксплуатации

Страница: 38 / 40

www.auga.nl
38
7. Carefully remove the quartz glass (11) from the UV-C cap (7).
8. Inspect the quartz glass (11) for any cracks or damage, if necessary,
replace the quartz glass (11).
9. Inspect the red seal (10) of the quartz glass, clean and replace the red
seal (10) if there are any signs of damage.
10. If the UV-C lamp (9) needs to be replaced, remove it from the globe
fitting and replace with a new lamp.
Use the appropriate type of UV-C lamp, as indicated on the lamp or lamp
label. The wrong UV-C lamp will break and may cause damage
to other components of the pressure filter. Hold the new UV-C lamp with
a clean cloth.
11. Put the quarts glass (11) back by pushing it in to the UV-C cap (7).
12. Tighten the coupling nut (12) of the quartz glass (11) thoroughly.
13. Inspect the white seal (8) of the UV-C cap (7), clean and replace the
white seal (8) if there are any signs of damage.
14. Position the UV-C cap (2+7) straight up on the lid (13) and secure in
place with 2 hands.
15. Mount the 4 screws from the UV-C cap (2+7).
16. Put the pump into operation by plugging it into the power outlet. Follow
the pump instructions carefully.
17. If no leaking is found, you can also put the UV-C lamp of the pressure
filter into operation by plugging it into the power outlet.
Description of parts: (illustrations 11 and 12, page 6 and 7)
No. Description
1 UV-C viewing glass
2 UV-C cover lid
3 UV-C ballast
4 Earthing plate
5 Switch plate
6 Switch
7 UV-C cover base
8 O-ring UV-C cover
Ø72x2.65
9 UV-C lamp
10 O-ring quarts glass
Ø48x3.1
11 Quarts glass
12 Quarts glass nut
13 Pressure filter lid
14 Distribution plate
15 Lid distribution chamber
16 Screw 3.9x16
17 Distribution valve
18 Stainless steel rotating
handle
19 Fill indicator fixing
20 Fill indicator
21 O-ring axle Ø13x3.1
22 Nut fitting
23 Hose fitting or tap with
hose fitting
No. Description
24 O-ring knob Ø35x3.1
25 UV-C tube
26 Distribution valve
27 Hose fitting seal or tap with hose
fitting
28 Tap with hose fitting
29 Bearing above rotating handle
30 Knob
31 Coupling rotating handle
32 Rotating handle
33 Button rotating handle
34 Wringer
35 Filter foam
36 Bearing under rotating handle
37 Distribution plate
38 Fixing filter foam
39 UV-C pipe cap
40-1 Bio-ring lid
40-2 Bio-ring
40-3 BioBalls
41 Tank seal Ø346x8
42 Clamp ring
43 Tank
44 Fixing clamp ring
English