www.auga.nl
26
WARNING!
This pump is fitted with a permanent magnet.
The magnetic field can disrupt pacemakers, interfere with electric/electronic
components and erase data from data carriers.
Persons fitted with pacemakers must keep a safe distance of at least 1m from the
pump.
Persons who have not read and understood the operating instructions
should not use the pump!
This device is not intended for use by persons or children with impaired physical,
sensory or intellectual impairments, or if lacking in experience and/or know-how,
unless they are under supervision or have been trained in the use of the device
by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the device.
Design:
Efficient, multifunctional pump with a 6-pole, 3-phase, brush-free
permanent magnetic motor with high efficiency and long lifespan.
Pump axle and bearings made of top quality ceramics for resistance to
wear-and-tear.
Built-in single chip micro-computer with various safeguards to prevent
problems such as:
running dry, overheating, overuse, etc.
Motor made of poured synthetic resin (IP 68)
External operating panel with buttons and digital display, suitable for
step-free alteration of capacity and power usage.
Uses:
VarioFlow pumps are suitable for transporting fresh water / seawater, without
chemical additives, for circulation filter systems, ornamental waterways,
waterfalls and fountains.
Before carrying out any work to the pump and/or pond or other system
to which the pump is connected, remove the pump plug from the
electrical socket and other other connected devices.
Do not use the pump when there are people in the water! (Isolate the
pump from the mains network).
Uses: garden ponds, fish ponds, fountains, patio fountains (see figures
1+2)
Caution:
May only be used in garden ponds and the corresponding
protection zone if the installation fulfils the prevailing guidelines. In the
event of any doubts, please consult an electrician.
For technical information on the pump, see the nameplate or the
table on page 2.
Before carrying out any work to the pump and/or pond or other system
to which the pump is connected, remove the pump plug from the
electrical socket and other connected devices.
English
