Auerswald COMfort DECT 800, Руководство по установке и настройке

Страница: 19 / 36

Commissioning
19
햵
If you have finished entering all settings, you have to transfer the configuration into the PBX (File
... Save ... PBX).
☞
The field with the manually entered serial number remains marked in blue until the handset has
been correctly subscribed to the base station (see
chapter Login of the Handset to the Base Station
on page 13 ) and the configuration is read out again.
Logout of the Handset from the Base Station
To be able to unsubscribe a handset from the base station, the following steps have to be done one
after the other:
Logout of the Handsets from the Base Station and PBX
햲
Open the configuration program COMset and read out the existing configuration of the PBX (File
... Open ... PBX).
햳
Now open the page „Internal telephone numbers ... Scr -> COMfort DECT“ ( pic. 5 on
page 17 ). Enter the hook into the column „logout“ behind the corresponding serial number.
햴
Write back the configuration to the PBX (File ... Save ... PBX).
☞
To logout a handset, its series number must already been assigned to an internal telephone num-
ber. If that is not the case, create a telephone number for this purpose and assign it (see
chapter
Assign internal Telephone Numbers to the Handsets on page 16 ). If the handset has been logged-
out (After reading the configuration this serial number will not be offered in the column „Serial num-
ber of the mobile handset“ any longer), the useless internal telephone number may be deleted
again.