auer HRC 70 PILOT-PREMIUM страница 24 Скачать руководство пользователя

Страница: 24 / 76

INSTALLER

7 & 11kW HRC

HIGH TEMPERATURE HEAT PUMP

4.1.1 - Display screen: description of symbols

and their meaning

9-character

message

Display zone for time

and temperature

Day

4.1 - Control panel

On / Oﬀ

Clock

settings

Dial

Display screen

Symbol

Meaning

Summer mode in progress

Heat pump running

(compressor and fan running)

De-icing in progress

Electrical back-up is running

Boiler back-up request

Heat Pump circulator pump running

Heating circuit 1 circulator pump running

Heating circuit 2 circulator pump running

Domestic hot water production in progress

Setting / setting display

Time or programme is being set

"Comfort" mode

"Economy" mode

"Frost protection" mode

"Holiday" mode

4 - COMMISSIONING

• All work carried out on the water circuits and electrical

installations must be carried out by a qualiﬁ ed professional and
in accordance with current rules and regulations.

• Fill the installation with water and treat the water.
• Purge the heating circuits (open the air valves situated on the

highest points of the installation until all trapped air has been
released).

• Check that all circuits are properly sealed.
• Check that the power supply voltage is correct at the mains

switch.

• Check that all hydraulic connections have been properly

tightened and that there are no leaks.

• Check that all the valves are open, that there is water in the

heating circuit and that nothing is stopping the water from
circulating freely in the heat exchanger and the hydraulic circuit.

• Check that the sludge valve is correctly ﬁ tted and that nothing is

blocking its screen ﬁ lter.

• Once all of these checks have been carried out, switch the

appliances on.

• Configure the installation.

The appliance is pre-conﬁ gured for the following system:

- 17 kW Heat Pump

- Heat Pump without back-up

(neither boiler or electrical)

- 1 radiator circuit

- 1room thermostat to control radiator circuit

temperature

If necessary, this conﬁ guration can be modiﬁ ed using the

"Installer" menu.

N.B:

Frost protection for the Heat Pump

When the Heat Pump is switched oﬀ (temporarily or deﬁ nitively),
and the temperature of the outgoing water from the Heat Pump
falls belo

w 5°C, the circulator pump starts up and will only stop

running when the water temperature reaches 11°C.

The installation must NEVER be switched
on WITHOUT WATER in the heating circuit

Содержание HRC 70 PILOT-PREMIUM













































































Результаты поиска

Содержание HRC 70 PILOT-PREMIUM

Отзывы:

Похожие инструкции для HRC 70 PILOT-PREMIUM

Бренды по названию

Популярные бренды

auer HRC 70 PILOT-PREMIUM, Инструкция по установке и эксплуатации

Результаты поиска

Содержание HRC 70 PILOT-PREMIUM

Отзывы:

Похожие инструкции для HRC 70 PILOT-PREMIUM

Бренды по названию

Популярные бренды