Audix M63, Инструкция по установке и эксплуатации

Страница: 4 / 4

M63D v1.0
© 2019 Audix Corporation. Audix is a registered trademark of the Audix
corporation. Specifications subject to change without notice. For service
and warranty information, visit AudixUSA.com/service or call 800.966.8261
PIN / WIRE ASSIGNMENTS
The M63 is shipped with two 3-pin terminal blocks. One terminal block is for Audio
connection (audio A+, A-, Ground) and it is the only connection required for audio
and internal logic functionality as described in the overview. The second terminal
block (LED, C.C. Ground) is for use when connected to a DSP for control of LEDs and
contact closure. Two mating pair terminal block connectors are included in the box
for field connection, if needed.
CONNECTING TO A DSP
IMPORTANT: When connecting to a DSP, DIP switch 3 is always set to the left position.
GREEN Logic Input (LED Control)
WHITE Logic Output (Button)
BLUE Logic GND
DSP AUDIO
INPUT PORT
DSP LOGIC
I/O PORT
AUDIX M63’S
PHOENIX CONNECTOR
AUDIX M63’S
PHOENIX CONNECTOR
TO M63
TO M63
RED Audio (+)
BLACK Audio (–)
SHIELD GND/case
GREEN
GROUND
GROUND
GROUND
WHITE
BLACK
AUDIO (–)
BLUE
RED
AUDIO (+)
LED LOGIC IN
GROUND
CONTACT CLOSURE
AUDIO (–)
GROUND
AUDIO (+)