The settings cleared to default values include, but are not limited to, the following:
•
Dante device name
•
IP address (dynamic)
•
Audio routes
•
Pre-amp gains (0 dB)
•
High-pass filters (15 Hz)
•
Low-pass filters (off/bypassed)
•
LED outputs (off)
THIRD-PARTY API: NETWORK DEVICE CONTROL
In addition to Dante audio streams, the DN4 microphone interface provides logic and
audio controls using the 3rd party API: Network Device Control (NDC). The NDC API
provides the following functions:
•
Control up to two (2) LEDs or Logic Outputs on each mic port
•
Read one (1) Button or Logic Input on each mic port
•
Read microphone ID value
Complete API documentation is available in document NDC Protocol & API v1.0.1,
available at audixusa/API
SETTING UP AES67 STREAMS
To configure the device to support AES67 streams instead of the Audinate Dante
flows, follow Audinate’s AES67 configuration guide, available here:
•
https://dev.audinate.com/GA/dante-controller/userguide/webhelp/content/aes67_
config.htm
Note that other manufacturers supporting AES67 may also provide their own
instructions for setting up and using AES67 streams from a compatible Dante device.
