audium Sub 12 Active, Руководство пользователя

Страница: 6 / 16

- 6 -
Controls and Connectors:
1. Display: OLED graphic display
shows the current device status
2. Knob / push button.
3. Power LED: lights red when
subwoofer active, dimmed red in
standby.
4. Input LEDs: indicate active input
5. Analog Input 1 (Coax LFE / Stereo):
Connect these inputs to the PreOut
of your pre-amp or the Sub / LFE
outputs of your surround pre-amp.
6. Analog input 2 (XLR balanced): If
your pre-amp has a balanced LFE
output and a longer cable is
required because your sub is further
away from the system, this input is
recommended.
7. Analog Input 4 (Speaker Stereo): if
your amplifier has no PreOut or
Sub/LFE Out, use this input
8. Power socket: Plug in the power
cable here.
Make sure that the voltage
indicated next to the socket agrees
with your mains voltage..
Connectors, only available with Air
variant:
9. SMA socket for WLAN antenna
10. RJ45 Network socket
11. Digital Input (Coax SPDIF)
12. Digital Output (Coax SPDIF)
13. USB-B Socket
2
3
9
10
12
5
7
6
11
8
4
1
3
1