manualshive.com logo in svg

Audison Thesis HV venti, Руководство пользователя, Страница: 22 / 25

Поделиться
Скачать
Audison Thesis HV venti Скачать руководство пользователя страница 22

- 21 -

f.  NON-PROJECTING or SEMI-PROJECTING installation

HOW TO USE THE ADHESIVE DRILLING TEMPLATE

NON-PROJECTING FIXING

SEMI-PROJECTING FIXING

Recommended for better thermal dissipation

The drilling template is useful for 
NON-PROJECTING or 
SEMI-PROJECTING installation. 
It is not necessary if installations totally 
project from the surface.
It has two functions:
1) It permits to drill the fi xing panel 
(support panel) to secure the fi xing 
plate.
2) It permits to exactly cut the upper 
panel (level panel) in order to embed 
the amplifi er.

PROCEDURE

PHASE 1
1) Put the fi xing template onto the fi xing panel (support panel) without removing the adhesive protection
2) Drill the fi xing panel (support panel) where indicated, including the areas where to put the spacers.

PHASE 2
1) Remove the adhesive protection.
2) Apply it on the upper wooden panel (level panel).
3) Use a hacksaw to cut along the indicated pattern, according to the type of fi xing you like.
4) Drill the holes for the spacers fi xing.

Caution!:
There are several thin marks on the template, which you can use if you like to cover the cut edge. Use the most   
suitable mark to the thickness of the material you choose for the covering. 
Use suitably thick wooden spacers (20mm min.) all along the structure.

Support panel

Level panel

Support panel

Level panel

INSTALLATION

OWNER’S MANUAL

11

Содержание Thesis HV venti


























Отзывы:

Нет отзывов