12
ACCESSORIES
This cooling system is specially designed to provide LRx amplifiers with the right working
temperature.
CLK2
should be used when LRx amplifiers work in extremely hard conditions (very low loads) or in
installations where space is too narrow and heat sink cooling is not enough. It consists of two units
to apply onto the amplifier sides; each of them is provided with an electronically controlled fan. Its
intervention depends on a thermal sensor that starts the system as soon as LRx heat sink reaches
45˚C. The same sensor is connected to a special circuit which controls the two fans speed
progressive increase when temperature increases, too.
Air flux constant control allows the amplifier very good thermal stabilization and limits noise.
CLK2 – LRx Cooling Kit
13
ACCESSORIES
Installation:
