44
OWNER’S MANUAL
APM /
8. MEASUREMENT SESSION COMPETITION MODE
To perform this operation it is necessary to connect an Audison bit processor to the bit Tune.
1.
Select
Competition
on the main PC Software page.
Then select the SPL category, using the drop-down menu.
2.
Select
Auto FSA +TMD
.
3.
Press
Next
to continue with the measurements.
4.
Accurately place the Dummy Head in the vehicle
compartment
(see sect. 3.1)
. If the bit Tune and Dummy
Head are interfaced correctly, a message showing the
correct interfacing will be displayed “
Dummy Head found
”.
Press
BACK
to go back to the previous step.
Press
NEXT
to continue with the measurement.
Press
CANCEL
to exit.
Possible error message.
The message
“Dummy Head not found”
appears in case
the connections between
Dummy Head
and bit Tune are
not found or the cables are not connected correctly.
Check the connections and wait for the message stating
that there is a connection between the devices
“Dummy
Head found”
.
8.1
COMPETITION MODE WIZARD
8
Содержание APM
Страница 1: ...OWNER S MANUAL rev 1 0 audison com ...