6
English /
English
Congratulations on purchasing our product. Your satisfaction is the first requirement that our products
must meet: the same satisfaction as the one gained by those who long for experiencing the car audio
emotion. This manual has been drawn to provide the main instructions required to install and use the
system properly. However, the range of possible applications is wide; for further information, please
feel free to contact your trusted dealer or our technical support at the email [email protected]
Before installing the components, please carefully read all of the instructions contained in this manual.
Failure to respect these instructions may cause unintentional harm or damage to the product.
1.
All components must be firmly secured to the vehicle structure. Do the same when installing any
custom structures you may have built. Confirm your installation is solid and safe. A component
coming loose while driving may cause serious damage to the passengers, as well as to other
vehicles.
2.
Always wear protective eyewear when using tools, as splints or product residue may become
airborne.
3.
In order to avoid incidental damage, keep the product in the original packaging until you are ready
for the final installation.
4.
Do not carry out any installation inside the engine compartment.
5.
Before starting with the installation turn the head unit and all other audio system devices off, avoiding
any possible damage.
6.
Make sure that the location you choose to install the components does not interfere with the normal
operation of any mechanical or electrical devices of the vehicle.
7.
Do not install loudspeakers where they may be exposed to water, excessive humidity, dust or dirt.
8.
Do not install the tweeter without the protective grille.
9.
Do not install the components or make cable run close to electronic or mechanical devices of the
vehicle.
10.
Be very cautious when drilling or cutting into the vehicle chassis, making sure there are no cables
or structural elements essential to the vehicle underneath or in the selected area.
11.
When routing cables, make sure that the cable does not come in contact with sharp edges or near
moving mechanical devices. Make sure that it is firmly attached and protected along its entire
length and its insulation is self-extinguishing.
12.
Only use cables with the proper section (AWG) indicated herein.
13.
When running the cable through a hole in the vehicles chassis, protect the cable with a rubber ring
(grommet). Be sure to provide proper protection for cables running close to heat-generating devices.
14.
Do not run the wires outside of the vehicle.
15.
Use top quality cables, connectors and accessories such as found in the Connection catalogue.
16.
Warranty certificate: For more information visit the Audison website.
SAFE SOUND
USE COMMON SENSE AND PRACTICE SAFE SOUND. PLEASE REMEMBER THAT LONG EXPOSURE TO
EXCESSIVELY HIGH SOUND PRESSURE LEVELS MAY DAMAGE YOUR HEARING. SAFETY MUST BE AT
THE FOREFRONT WHILE DRIVING.
Information on electrical and electronic equipment waste (for those European countries which organize the separate
collection of waste)
Products which are marked with a wheeled bin with an X through it can not be disposed of together with ordinary
domestic waste. These electrical and electronic products must be recycled in proper facilities, capable of managing the
disposal of these products and components. In order to know where and how to deliver these products to the nearest
recycling/disposal site please contact your local municipal office. Recycling and disposing of waste in a proper way
contributes to the protection of the environment and to prevent harmful effects on health.
Esec_JBL007_Owner's manual Prima Speaker_Rev 20D.indd 6
Esec_JBL007_Owner's manual Prima Speaker_Rev 20D.indd 6
31/07/20 11:57
31/07/20 11:57