-9-
128-6117
9 of 16
Remote Controlled VCP Functions
These features can only be used with an Audiovox
Video Cassette Player, if this option was installed with
your video package.
17. POWER BUTTON
This button is used to turn the VCP on and off.
18. “REW” REWIND BUTTON
If this button is pushed while the tape is stopped,
the tape will rewind. If this button is pushed while
the tape is playing, the VCP will go into rewind
search mode. For more information consult the
Audiovox VCP owner’s manual.
19. PLAY BUTTON
Press this button to activate play mode while a
tape is loaded into the VCP. This button may also
be used to disengage search and pause modes.
For more information, consult the VCP owner’s
manual.
20. “F.FWD.” FAST FORWARD BUTTON
If this button is pushed while the tape is stopped,
tape will fast forward. If this button is pushed while
the tape is playing, the VCP will go into fast forward
search mode. For more information on the
search feature of the VCP, consult the VCP
owner’s manual.
21. REPLAY BUTTON
Pressing this button will rewind tape and
immediately begin playback when the tape is fully
rewound.
22. STOP BUTTON
Press this button to stop the tape.
CHANNEL SET UP
In order to easily access all available TV channels, it
may be necessary to perform channel auto-
programming whenever the vehicle’s geographic
location has changed, i.e. city to city, weak signal area.
1. Press the AUTO MEMORY button on the Remote
Control Unit or the AUTO PROGRAM button on
the drop down video unit. You will see the TV
cycle through all its channels. The built-in
microprocessor will automatically note each
channel that is actively broadcasting in your area.
2. (A) To tune only strong clear channels with the
CHANNEL UP/DOWN buttons, press the SKIP/
SEARCH button on the Remote Control Unit until
“SKIP MODE ON” is displayed on the bottom of
the screen. The TV will now tune only to strong
active channels when the UP or DOWN buttons
are used on the monitor or remote control.
3. (B) To tune weak or marginal channels with the
CHANNEL UP/DOWN buttons , press the SKIP/
SEARCH button on the Remote Control Unit until
“SKIP MODE OFF” is displayed on the bottom of
the screen. Tune to the desired channel using
the CHANNEL UP/DOWN buttons or go directly
to the channel by using the 0-9 buttons on the
Remote Control.
